Tag Connecticut

Captain Black, RLSH blogs

Unarmed schools invite armed fools

by Webmaster

“Unarmed schools invite armed fools!” -Cap Black, The Hood Conservative
 
 

December 14th, 2012 is a date sure to life in infamy.  Twenty elementary school children were killed by a suspect not much more than a child himself.

 
Twenty six people were murdered today at an elementary school. Its magnitude was such that I first thought the report was about an overseas tragedy.

Voices pro and con regarding gun control shriek, while a recession-weary populace numbly hugs its children, thanking God this didn’t happen to them.
 
There may be an organic solution to this appalling vulnerability,
 
After September 11th, select airline crew men were trained as ” Federal Flight Deck Officers “, authorized to carry firearms whose ammunition is designed not to de-pressurize aircraft.
 
They are the last line of defense in occasionally unfriendly skies. Should all else fail, they will defend the aircraft with lethal force if needed. 
 
After today, hardening America’s soft under belly of gun free school systems ( assailants exempted ) may require a radical thought for some: 
 
Arming select teachers and/or support staff.
 
Let it sink in before you react.
 
There are only so many school resource officers and private ones to go around. When budgets tighten, security is the first thing eliminated or severely cut.
 
Our ally Israel arms school support personnel ( including designated parents ) while on campus. Critics may say, ” but they have a terrorism problem ” as grounds for such action.
 
Active shooters facing unarmed students, faculty and staff is more than enough terrorism for average Americans.   
Chronically unsafe inner city neighborhoods could use this option since armed criminals and psychotics happen there more often.
Today’s tragedy in Connecticut reminds us that disarming the law abiding means attackers can press lethal advantages long before law enforcement arrives.
 
If airline crews are armed as an airborne last line of defense, why are school’s first line of defense, teachers, left too often with their bodies as the only protection when children are attacked?
 
Save the children: arm faculty. 
 
Make criminals and crazies think twice.
 
 Cap Black, The Hood Conservative, says,
” Unarmed schools invite armed fools!”
  
 Help Cap Black Help Others!
http://www.gofundme.com/197xk8
 
” Be your OWN Superhero!”
Tech and Equipment, Tutorials

Body Armor: Bulletproof Vest

by Webmaster

By Dark Guardian
You don’t have superpowers. No matter how much training you have it can only take one bullet to end your life. This is real life and if you are going to be doing anything that might put yourself in danger you need to keep yourself protected. You should make sure you have a bullet proof vest. Buying vests can be pricey, but you always have to think; how much is my life worth?
Here is a list of the different level vests and the protection they provide.
Type I
Type I body armor is light. This is the minimum level of protection. This armor would protect against 2.6 g (40 gr) .22 Long Rifle Lead Round Nose (LR LRN) bullets & .380 ACP Full Metal Jacketed Round Nose (FMJ RN) bullets. Type I body armor is not what you would want if you are possibly going to be in danger.
Type IIA
(Lower Velocity .357 Magnum; 9mm). This armor protects against .357 Magnum jacketed soft-point bullets, with nominal masses of 10.2 g (158 gr), impacting at a velocity of 381 m/s (1,250 ft/s) or less, and against 9mm full-metal jacketed bullets, with nominal masses of 8.0 g (124 gr), impacting at a velocity of 332 m/s (1,090 ft/s) or less. It also provides protection against such threats as .45 Auto., .38 Special +P, and some other factory loads in caliber .357 Magnum and 9mm, as well as the Type I threats. Type II–A body armor is well suited for those seeking protection from lower velocity .357 Magnum and 9mm ammunition.
Type II
(Higher Velocity .357 Magnum; 9mm). This armor protects against .357 Magnum jacketed soft-point bullets, with nominal masses of 10.2 g (158 gr), impacting at a velocity of 425 m/s (1,395 ft/s) or less, and against 9mm full-jacketed bullets, with nominal velocities of 358 m/s  (1,175 ft/s). It also protects against most other factory loads in caliber .357 Magnum and 9mm, as well as the Type I and II–A threats.
Type II body armor is heavier and more bulky than either Types I or II–A. It is good for those seeking protection against higher velocity .357 Magnum and 9mm ammunition.
Type IIIA
(.44 Magnum; Submachine Gun 9mm). This armor protects against .44 Magnum, lead semi-wad cutter bullets with gas checks, nominal masses of 15.55 g (240 gr), impacting at a velocity of 426 m/s (1,400 ft/s) or less, and against 9mm full-metal jacketed bullets, with nominal masses of 8.0 g (124 gr), impacting at a velocity of 426 m/s (1,400 ft/s) or less. It also pro-vides protection against most handgun threats, as well as the Type I, II–A, and II threats. Type III–A body armor provides the highest level of protection currently available from concealable body armor and is generally suitable for routine wear in many situations. Type III-A offers great protection but can start becoming bulky and warm especially in hot and humid climates.
Type III
(High-powered rifle). This armor, normally of hard or semi rigid construction, protects against 7.62mm full-metal jacketed bullets (U.S. military designation M80), with nominal masses of 9.7 g (150 gr), impacting at a velocity of 838 m/s (2,750 ft/s) or less. It also provides protection against threats such as 223 Remington (5.56mm FMJ), 30 Carbine FMJ, and 12-gauge rifled slug, as well as the Type I through III–A threats. Type III body armor is clearly intended only for tactical situations when the threat warrants such protection, such as barricade confrontations involving sporting rifles.
Type IV
(Armor-piercing rifle). This armor protects against .30–06 caliber armor-piercing bullets (U.S. military designation APM2), with nominal masses of 10.8 g (166 gr) impacting at a velocity of 868 m/s (2,850 ft/s) or less. It also provides at least single-hit protection against the Type I through III threats.
Type IV body armor provides the highest level of protection currently available. Because this armor is intended to resist “armor piercing” bullets, it often uses ceramic materials. Such materials are brittle in nature and may provide only single-shot protection, since the ceramic tends to break up when struck. As with Type III armor, Type IV armor is clearly intended only for tactical situations when the threat warrants such protection.
I do not advise putting yourself in a situation where you are in danger of being shot. If there is any chance please keep yourself protected. Decide what level vest suits your needs. I have not been shot at yet, but there are times where it could have came close. For myself and especially for the people in my life I make sure to wear my vest.
Stay protected and stay safe.
Here are some site suggestions to check out bullet proof vests.
http://www.bulletproofme.com/
http://www.turtleskin.com/Body-Armor.aspx
http://www.usabodyarmor.com/
http://www.globalarmour.com/
http://www.galls.com/category2.html?assort=general_catalog&cat=2992

Tech and Equipment, Tutorials

Levels of Bulletproofing

by Webmaster

Here are the different levels of bullet proofing and what they protect you against. Picking the Level of bulletproofing you need depends on the threat level you face.

Armor Level Protects Against
Type I (.22 LR; .380 ACP) This armor protects against .22 caliber Long Rifle Lead Round Nose (LR LRN) bullets, with nominal masses of 2.6 g (40 gr) at a reference velocity of 329 m/s (1080 ft/s ± 30 ft/s) and .380 ACP Full Metal Jacketed Round Nose (FMJ RN) bullets, with nominal masses of 6.2 g (95 gr) at a reference velocity of 322 m/s (1055 ft/s ± 30 ft/s).
Type IIA (9 mm; .40 S&W) This armor protects against 9 mm Full Metal Jacketed Round Nose (FMJ RN) bullets, with nominal masses of 8.0 g (124 gr) at a reference velocity of 341 m/s (1120 ft/s ± 30 ft/s) and .40 S&W caliber Full Metal Jacketed (FMJ) bullets, with nominal masses of 11.7 g (180 gr) at a reference velocity of 322 m/s (1055 ft/s ± 30 ft/s). It also provides protection against the threats mentioned in [Type I].
Type II (9 mm; .357 Magnum) This armor protects against 9 mm Full Metal Jacketed Round Nose (FMJ RN) bullets, with nominal masses of 8.0 g (124 gr) at a reference velocity of 367 m/s (1205 ft/s ± 30 ft/s) and 357 Magnum Jacketed Soft Point (JSP) bullets, with nominal masses of 10.2 g (158 gr) at a reference velocity of 436 m/s (1430 ft/s ± 30 ft/s). It also provides protection against the threats mentioned in [Types I and IIA].
Type IIIA (High Velocity 9 mm; .44 Magnum) This armor protects against 9 mm Full Metal Jacketed Round Nose (FMJ RN) bullets, with nominal masses of 8.0 g (124 gr) at a reference velocity of 436 m/s (1430 ft/s ± 30 ft/s) and .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets, with nominal masses of 15.6 g (240 gr) at a reference velocity of 436 m/s (1430 ft/s ± 30 ft/s). It also provides protection against most handgun threats, as well as the threats mentioned in [Types I, IIA, and II].
Type III (Rifles) This armor protects against 7.62 mm Full Metal Jacketed (FMJ) bullets (U.S. Military designation M80), with nominal masses of 9.6 g (148 gr) at a reference velocity of 847 m/s (2780 ft/s ± 30 ft/s) or less. It also provides protection against the threats mentioned in [Types I, IIA, II, and IIIA].
Type IV (Armor Piercing Rifle) This armor protects against .30 caliber armor piercing (AP) bullets (U.S. Military designation M2 AP), with nominal masses of 10.8 g (166 gr) at a reference velocity of 878 m/s (2880 ft/s ± 30 ft/s). It also provides at least single hit protection against the threats mentioned in [Types I, IIA, II, IIIA, and III].